* Spectra Hands-Free Breast Pumping Set 2 Pieces

- Fixed with underwear, Easy to use
- Bilateral configuration, Both hands free
- Smooth material, Soft fit
- Safe/hygienic, Backflow prevention function

* Check the size of the funnel to see if the product is right for you!
- Option A
Size A : Inner diameter 24mm

- Option B
Size B : Inner diameter 28mm

* Tips for choosing funnel size
1. If the areolar tissue is sucked into the tube, it is a big funnel for you. Replace it with a smaller size.
2. When the nipple gets stuck in the tube, it is a small funnel for you. Replace with a larger size.
# If you use a funnel smaller than the nipple size, the nipple will be damaged and milk expression will not work well.

* Which funnel is right for me?
- There is enough space for the nipple to move in the funnel tube.
- It is good if the areola does not go inside the tube.
Using a well-fitting funnel will not put pressure on the mammary glands or nipples while pumping, allowing for more comfortable pumping.

* Two milking modes increase product usability!
- Hands-free milking mode : Used by attaching to underwear
- Normal milking mode : Method used by connecting a baby bottle

# Use the Spectra series after connecting the air hose to the main unit without connecting the hose tip.

# For dual series products, attach the hose tip to the air hose and then connect the hose tip to the main body.

* How to assemble a hands-free breast pump set
· Before assembling the product, be sure to wash your hands and dry them completely before use. Before breastfeeding, keep your breasts clean so that no foreign substances remain.
· Make sure that the parts that come into contact with breast milk are sufficiently cleaned and disinfected before use, and assemble according to the method described in the user manual.

1. Prepare the belt base, backflow prevention silicone, and backflow prevention cap.
2. Assemble the valve base, backflow prevention silicone, and backflow prevention cap in order.
# Assemble the backflow prevention cap so that parts A and B are horizontal.
Make sure the convex part of the backflow prevention silicone is facing down.
3. Align the funnel and valve base to the location of the milk outlet.
4. Press and tighten the funnel and valve base with both hands.
5. Insert the wearable silicone head into the valve base.
6. Align the previously assembled parts and the breast pump and combine them.
7. Connect the assembled hands-free pumping cup and hose.
8. Check whether the hose is properly plugged in.

* How to assemble additional accessories (breast pump base)
· If you change the assembly method using the parts (breast pumping base), it can be used in the same way as the existing pumping method.
· For baby bottles, you can use the existing Spectra All New baby bottle.
(If you do not have the Spectra All New baby bottle, please purchase and use a baby bottle separately.)
* Piston-type breast pumps cannot be used in both normal wet mode and hands-free mode because the backflow prevention cap is removed.

* Assemble with the hose connector facing toward the rear.

*How to wear
1. In order to maintain the same pressure during breast pumping, it is recommended to purchase another bra of a generous size and try it on with a breast pump, or to choose a bra that can be worn over the bra you usually use to provide a more comfortable fit.

2. Maintain a vertical orientation within the bra you use, and do not wear a bra that slips, sags, or tilts to the side during use.

# It is used as a sports bra or a regular bra because it is more comfortable to wear and the product stays in place even when the user moves the body.

* Instructions on how to attach it to your chest
- Position the nipple so that it is located in the center of the pump funnel.
- Make sure the funnel and chest are in good contact.
- Check whether the chest direction (nipple direction) and the funnel are perpendicular.

# Make sure the nipple is not curved and is positioned in the center of the hands-free funnel at the correct angle.

# When milking, sit or stand vertically.

* When using a breast pump set, the milking capacity is 250ml of breast milk per cup.
Once the cup is full, turn off the pump and stop expressing breast milk.
To express more than 250ml of breast milk, stop pumping, empty the pumping cup, and start pumping again.

* How to separate and transfer breast milk
1. Turn off the breast pump.
2. While wearing the hands-free pump, carefully remove only the connecting hose.
If you hold the milk cup too hard, a gap may form between the funnel and the milk cup and breast milk may spill, so please handle it carefully.
3. Carefully remove the hands-free milk cup from the bra to prevent milk from spilling.
You may be maintaining a vacuum between the funnel and your chest.
First, insert your finger between the funnel and the breast, pull out the funnel slightly, and then take out the next pumping cup. If you hold the hands-free suction cup tightly and lift it away from your breast, milk may leak out.

* How to wash
1. Never clean the air hose (including the hose tip), and replace it if it is damaged or contaminated. (This is a consumable item)
2. Disassemble in reverse order of assembly and clean all parts that come into contact with breast milk. (Funnel, milk cup, silicone head, backflow prevention cap, valve base, milk base)
3. Clean thoroughly using baby bottle detergent.
When using for the first time, wash thoroughly with baby bottle cleaner and disinfect with hot water before use.
4. Avoid harsh abrasives or excessive heat and handle all parts carefully.
5. When not in use, keep out of reach of infants and children.
6. Dry the parts completely before storing.

* Components
Breast pump cup 2
funnel 2
valve base 2
Silicone Head 2
Backflow prevention silicone 2
breast pump base 2
air hose 2
hose tip 2
# This product is designed to allow both sides of the breast pump.