SAFE START2 TH22 Domestic Non-Contact Infrared TherMometer Fever Check Fever Detection

* Introduction of item
This product detects the infrared heat of an object and measures the temperature of the object in a non-contact manner.
Simple to operate, non-contact measurement makes it hygienic, fast and accurate.
When measuring, place the measurement key (shaped like a thermometer) at a distance of 3 to 5 cm from the measurement object and measure the temperature.

* Caution
· Keep the sensor and the inside of the front of the head clean before and after use.
· Use at a stable temperature when measuring.
If the surrounding temperature fluctuates, measure after approximately 10 minutes when moving indoors or outdoors.
· Measure the temperature of an object at very high or very low temperatures, and then measure its body temperature 10 minutes later.
· If the ambient temperature difference is large, wait at least 5 minutes before measuring.
· Measure your temperature 30 minutes after exercising, showering, or eating.

* Measurement method
- Please make sure the measurement mode is temperature mode before use.
- The user adjusts the distance to the object to 3-5 cm (Figure 1) and presses the measurement button to scan the temperature.
- The LCD display (Figure 2) shows the measured temperature value after approximately 0.2 seconds.
- If the temperature is affected by changes in the surrounding environment (e.g. winter), stay indoors for approximately 10 minutes (Figure 3) and measure again.

* Conformity registration certificate for broadcasting and communication equipment, etc.

* Product Features
- Custom designed for object temperature measurement
- High stability and reliability with high-precision infrared sensor
- Measurement data can be saved
- Large LCD display with backlight
- Two modes can be selected: Fahrenheit and Celsius.
- Auto-off power saving function (power off after about 10-15 minutes)
- Small in size, reasonable in structure, and easy to operate
- The LED screen displays colors according to the measured temperature results.

* Replacing batteries
When the battery level at the bottom of the LCD gets low, it means that the battery power is low.
Slide open the battery cover and replace the battery.
When replacing batteries, replace them with correct polarity. (AAA * 2)

* Q & A
Q. Is the temperature only measured at 33-34 degrees?
A. There are two modes for temperature measurement.
Pressing the M key while the screen is on changes the measurement mode.

Q. Is the temperature above 87 to 90 degrees?
A. The temperature display unit has been changed to Fahrenheit (F).
If you press the S key for more than 3 seconds, F1 appears, then lightly press the M key to change to Celsius (C), and press the S key four times in succession to exit.

* Batteries are not included.

SAFE START2 TH22 Domestic Non-Contact Infrared TherMometer Fever Check Fever Detection